1
0

Algae to crude oil: Million-year natural process takes minutes in the lab


               
2014 Jan 7, 12:33am   624 views  3 comments

by zzyzzx   follow (9)  

http://phys.org/news/2013-12-algae-crude-oil-million-year-natural.html

Algae to crude oil: Million-year natural process takes minutes in the lab

Engineers have created a continuous chemical process that produces useful crude oil minutes after they pour in harvested algae – a verdant green paste with the consistency of pea soup.

The research by engineers at the Department of Energy's Pacific Northwest National Laboratory was reported recently in the journal Algal Research. A biofuels company, Utah-based Genifuel Corp., has licensed the technology and is working with an industrial partner to build a pilot plant using the technology.

In the PNNL process, a slurry of wet algae is pumped into the front end of a chemical reactor. Once the system is up and running, out comes crude oil in less than an hour, along with water and a byproduct stream of material containing phosphorus that can be recycled to grow more algae.

With additional conventional refining, the crude algae oil is converted into aviation fuel, gasoline or diesel fuel. And the waste water is processed further, yielding burnable gas and substances like potassium and nitrogen, which, along with the cleansed water, can also be recycled to grow more algae.

While algae has long been considered a potential source of biofuel, and several companies have produced algae-based fuels on a research scale, the fuel is projected to be expensive. The PNNL technology harnesses algae's energy potential efficiently and incorporates a number of methods to reduce the cost of producing algae fuel.

"Cost is the big roadblock for algae-based fuel," said Douglas Elliott, the laboratory fellow who led the PNNL team's research. "We believe that the process we've created will help make algae biofuels much more economical."

PNNL scientists and engineers simplified the production of crude oil from algae by combining several chemical steps into one continuous process. The most important cost-saving step is that the process works with wet algae. Most current processes require the algae to be dried – a process that takes a lot of energy and is expensive. The new process works with an algae slurry that contains as much as 80 to 90 percent water.

"Not having to dry the algae is a big win in this process; that cuts the cost a great deal," said Elliott. "Then there are bonuses, like being able to extract usable gas from the water and then recycle the remaining water and nutrients to help grow more algae, which further reduces costs."

While a few other groups have tested similar processes to create biofuel from wet algae, most of that work is done one batch at a time. The PNNL system runs continuously, processing about 1.5 liters of algae slurry in the research reactor per hour. While that doesn't seem like much, it's much closer to the type of continuous system required for large-scale commercial production.

The PNNL system also eliminates another step required in today's most common algae-processing method: the need for complex processing with solvents like hexane to extract the energy-rich oils from the rest of the algae. Instead, the PNNL team works with the whole algae, subjecting it to very hot water under high pressure to tear apart the substance, converting most of the biomass into liquid and gas fuels.


(L-R): Algae slurry; biocrude oil; and, with further processing, refined biocrude which contains mostly the makings of gasoline and diesel fuel

The system runs at around 350 degrees Celsius (662 degrees Fahrenheit) at a pressure of around 3,000 PSI, combining processes known as hydrothermal liquefaction and catalytic hydrothermal gasification. Elliott says such a high-pressure system is not easy or cheap to build, which is one drawback to the technology, though the cost savings on the back end more than makes up for the investment.

"It's a bit like using a pressure cooker, only the pressures and temperatures we use are much higher," said Elliott. "In a sense, we are duplicating the process in the Earth that converted algae into oil over the course of millions of years. We're just doing it much, much faster."

The products of the process are:

Crude oil, which can be converted to aviation fuel, gasoline or diesel fuel. In the team's experiments, generally more than 50 percent of the algae's carbon is converted to energy in crude oil – sometimes as much as 70 percent.
Clean water, which can be re-used to grow more algae.
Fuel gas, which can be burned to make electricity or cleaned to make natural gas for vehicle fuel in the form of compressed natural gas.
Nutrients such as nitrogen, phosphorus, and potassium – the key nutrients for growing algae.

Comments 1 - 3 of 3        Search these comments

1   zzyzzx   @   2014 Jan 7, 12:35am  

zzyzzx says

Most current processes require the algae to be dried – a process that takes a lot of energy and is expensive.

Was leaving the algae out in the dessert to dry that expensive???

Am I missing something here?

2   New Renter   @   2014 Jan 7, 1:29am  

donjumpsuit says

zzyzzx says

Was leaving the algae out in the dessert to dry that expensive???

Am I missing something here?

Typically done in drying ovens in a concentrated form. But it depends on what you are trying to capture (volatiles, nutraceuticals, biofuels) all would be treated different.

Drying in open dessert (you know chocolate cake) air would take way more time, and effort. How do you scrap up all that algae? How much would you lose? What impact does UV radiation have on your product? Do you have to clean the drying beds afterward?

Maybe but there are advantages. Deserts are HUGE - even if the drying takes longer more can be done per batch. The overall throughput may be MUCH higher. The energy is also more or less free.

How do you scrape up all that algae? Don't bother. Grow the algae in closed tanks at the desert and when ready pop the tops and let the sun and desert air do your drying for you. At that point bio contamination won't be a problem.

How much would you lose? Not much and again with enough volume some loss won't hurt.

What impact does UV radiation have on your product? probably little to none if you are talking about the extracted volitiles. If you are talking about sunburning the algae use a thick plate of optically clear plastic as a sunblock. Most plastics are great at blocking anything below violet light.

3   Tenpoundbass   @   2014 Jan 7, 2:48am  

662 degrees an hour to get 1.5 liters.

Well he did say they reduced the cost that "Helped" make it more affordable.

Comments 1 - 3 of 3        Search these comments

Please register to comment:

api   best comments   contact   latest images   memes   one year ago   users   suggestions   gaiste